Top of Page

Status Reports  Status Reports
Domain Time II Client
Version 5.2

This page contains options for additional features to monitor the Domain Time service in real-time.

Note: If you see the Policy Applied Group Policy applied indicator in the lower-left corner of the applet, there are settings on this page that are being overridden by an Active Directory Group Policy. Settings controlled by policy may be greyed-out or you may be otherwise prevented from making a change here. See the Active Directory page for more information on using Group Policies.

 

 Audit Server Real-Time Alerts 

Enabled

       
Primary Server:
  
Backup Server:
  

send to the backup only if primary is down
  Send reports using TCP (recommended)
send to both primary and backup servers   Send reports using UDP
 
Always audit this machine
Never audit this machine
Do not change audited status

Domain Time Server and Client are designed to be centrally monitored and have their synchronization status recorded by Domain Time Audit Server. This is usually done by Audit Server in a scheduled, background data collection process.

    However, Domain Time II Server and Client can send an immediate notification packet to Audit Server containing feedback on the success or failure of each time check to provide real-time monitoring and alerting. Domain Time Manager on the Audit Server machine will display the collected data on its Real-Time Alerts panel. See the Audit Server Alerts pages for more information on setting up Real-Time Alerts.

    If you want this function, check the Enabled checkbox and enter the DNS name or IP address of your Primary Audit Server.

    As of version 5.2, you may specify addresses for both a Primary and Secondary server for redundancy purposes. Use the radio buttons to select whether to
      send to the backup only if primary is down, or to
      send to both primary and backup servers.

    This function is designed to work well with the Audit Server "Hot Spare" standby mode functionality introduced in version 5.2.

    Select whether to use TCP or UDP for the notifications. In general, TCP is more reliable than UDP since delivery of TCP traffic is given priority, whereas UDP can be delayed or dropped entirely by busy network hardware. However, TCP does require more resources on the network stack of the Audit Server to handle the mechanics of building and tearing down TCP connections. If you have many machines sending lots of real-time updates using TCP, it is possible to exceed your operating system's ability to handle the number of open network connections. If you run into those limitations, you may want to consider changing your alert notices to UDP.

    CAUTION:

    If you are using notifications on many machines that are set to synchronize frequently, the feature can generate a significant amount of network traffic toward your Audit Server. You will probably want to enable instant notifications only on critical systems where an immediate alert of time sync errors is desired.

    Otherwise, you should use Audit Server's normal scheduled sync log collection instead, which is much more efficient. Audit Server's sync log collection can run in a background process to gather all sync records from audited systems with much less impact on overhead than active notifications. Audit Server can be programmed to provide alerts based on that data as well.


    Audit controls
    As of version 5.2.b.20110224, you have the option to have the Domain Time service control its own inclusion in or exclusion from the Audit Server Audit list.

      Always audit this machine
      Never audit this machine
      Do not change audited status

    These options override any existing settings on the Audit Server itself. You may use these functions to ensure that machines are (or are not) audited whether or not they are discovered by Audit Server.

 

Domain Time Service Status Monitor

 Service Status Monitor 

UDP Enabled
TCP Enabled
Port:  

The Service Status Monitor section controls whether Domain Time will provide a simple text response about its current status when asked by an application.

    This monitor is provided to allow third-party applications a simple way to monitor the activity of the Domain Time service. The Status Monitor will respond to TCP or UDP requests on the specified port with a simple text string showing the current activity of the service.

    Sample responses from the Status Monitor:

      ACK Adjusting (Indp. Server 5.2.b.20130403R)

      ACK Set 22 seconds ago (Indp. Server 5.2.b.20130403R)

 

Next Proceed to the Advanced page
Back Back to the SNMP Traps page

Domain Time II Software distributed by Microsemi, Inc.
Documentation copyright © 1995-2024 Greyware Automation Products, Inc.
All Rights Reserved
All Trademarks mentioned are the properties of their respective owners.