Note: Each running instance of the icon holds a file lock on the tray icon executable. If you enable this feature, it will be necessary for
all users (local and remote) to log off before performing an upgrade of Domain Time on this machine.
System Tray Applet Command Functions
Use the context menu to trigger a sync and check for updates.
Triggering a Time Sync
You can trigger the time service to synchronize with its time source by right-clicking system tray icon and choosing Synchronize Now from the context menu.
The DTTray Applet has a number of features that provide visual or audible feedback on the status of your clock synchronization.
Animate Clock During Timeset
While Domain Time is synchronizing the clock, the system tray icon will show a running clock icon. When the clock is successfully synchronized the icon will change to the standard Domain Time icon. You
can turn off this feature by unchecking the option from the right-click context menu.
The "Time Not Synchronized" Alert (The Flashing Clock)
This alert flashes a clock in the system tray to indicate the time is not synchronized.
If Domain Time is unable to synchronize its time with a time source, it will alert you to the problem by changing the
Domain Time icon in the system tray to a flashing clock icon. Once you have resolved the cause (usually
due to a network issue preventing Domain Time from contacting its time source) and re-synchronized, the icon will return to the normal
Domain Time icon.
The System Tray Applet can indicate a successful time synchronization with an audible signal.
Timeset Chimes are off by default. You can enable them by pulling up the context menu and selecting the sound device you wish to use to play
the chimes. The Timeset Chimes will play whether or not there is a logged-in user.
Choose Chime off if you do not want the signal to play.
Time of Day Chimes
The Time of Day Chimes feature is a special function that plays sound files at particular times of the day (on-the-hour, and at 15, 30, 45 minutes past the hour) to emulate a chiming clock.
You may download selected free chime packs from our site or create your own.
The Time of Day Chimes are off by default. You can enable them by pulling up the context menu and selecting the chime pack you want to use.
(You must have downloaded and installed at least one chime pack before this feature will be available.)
In order to play the Time of Day Chimes, you must meet these requirements :
- Your system must be configured with a sound card, drivers, and other hardware (such as speakers or headphones)
necessary to play .WAV files.
- Time of Day Chimes are played by the DTTray Applet, so you must be logged in and have the
System Tray Applet installed and visible in the system tray if you want the Time of Day chimes to play.
- You must have downloaded and installed at least one chime pack (see below).
Choose None if you do not want the chimes to play.
How to Install Chime Packs
Chimes are standard .WAV sound files played using the Windows Media subsystem. You can choose from free chime packs
that we've prepared for you to download or you may create your own.
To install a chime pack, download the zip file and unzip the contents into your Media folder
(usually C:\Windows\Media). There will be one text file (.txt) and one or more sound files (.wav)
contained in the zip. The text file contains a description of the chime pack, and instructions
for which sound file goes with which event. These instructions are used by the DTTray Applet
when you chose a chime pack.
Important: The .txt file from the chime pack must be copied into the Media folder
along with the .wav files. It must be present for the chime function to work.
After unzipping the files into your Media folder, right-click the Domain Time II system tray
applet. Your newly-installed chime pack should show up by name under Time of Day chimes.
Configure and Customize your Chimes
Chimes are fully configurable using the Windows Sounds Control Panel applet (called Sounds and Audio Devices on older versions of Windows).
To customize your chimepack, launch the Sounds (Sounds and Audio Devices) applet, then click the Sounds tab. Scroll down through the
list until you see the Domain Time II sound scheme. Listed under Domain Time II, you'll see entries for "Every hour at
15 after," "Every hour at 30 after," and so on. You may associate any .WAV files you like with
the various sound events.
The "Every hour tolling the hours" sound is played after any other chimes on the hour, and is
played a number of times corresponding to the hour (using a 12-hour scheme). At one o'clock, it
will play once, at two o'clock it will play twice, and so forth.
You can make your own chime pack by collecting the .WAV files you want to use and creating a text file for them.
Download one of the chime packs from the list above and look at how the text file specifies the sounds.
To have your own chimepack show up so you can select it from the System Tray Applet context menu, simply create a new text file with a .txt extension.
The file should be in the same format as the sample chimepack, listing which .WAV plays for which event. Use a full or relative path before the filename
if your .WAV files aren't located in the Media folder. You'll notice from the sample .txt files that you can create a very elaborate set of chimes played
at various times and events. Feel free to experiment!
This window displays all Domain Time-related network traffic sent or received by this machine.
View detailed statistics and view drift graphs
Viewing System Statistics
You may view the current time statistics on this machine by double-clicking the system tray icon, or by right-clicking the icon and choosing
Client (and/or Server) Statistics from the menu.
Note that Domain Time II Server acts as both a time client and a time server, so there
are two statistical displays available on Server.
In addition to detailed summary statistics, DTTray can show you a graphical representation of the accuracy of the clock on your machine sampled at the time it
synchronized with its time source. You may scroll through the entire drift data to see how your clock has been performing over time.
Proceed to the Registry Settings page
Back to the Support page